Set of 4 Forward FCH-418 – Heavy Duty Mobile Column Lifts

Forward’s FCH-418 Mobile Column Lifting System is for a forward thinker who doesn’t want to tie up space in their workshop with a permanent lift structure. Battery operated with the internal charger you plug these lifts into any standard 110-volt receptacle and it’ll charge the DC batteries inside.

Set of 4, 18,000 lbs. Each
72,000 lbs Total Capacity
$49,995 or $995 Per Month

Heavy Duty Mobile Column Lifting Systems 13,000 lbs. / 18,000 lbs. Column Capacities.

Reliable lift systems for independent repair shops, car dealerships, bodyshops, home enthusiasts, and heavy-duty truck facilities.

The power and mobility to make your repairs anywhere in your shop! Two, four, six or eight mobile column configurations can accommodate heavy duty trucks up to 144,000 pounds.

BATTERY OPERATED WITH INTERNAL CHARGER AND LIGHTED STATUS DISPLAY
Batteries purchased separately for international use
PROTECTED HYDRAULIC CYLINDER ROD
The hydraulic cylinder is inverted inside the carriage and the chrome piston rod is protected from debris and damage. This extends the life of the column and reduces maintenance frequency and cost
SPRING LOADED STEERING AND BRAKING SYSTEM
No need to manually operate a pallet jack to move the columns saves precious time every time you move
EASY TO MOVE ADJUSTABLE FORKS
Improves set up time without the need for reducer sleeves adjustment range: 9” to 25”
TOUGH RUBBER-COATED STEEL WHEELS
Easily roll over dirt and debris that can jolt other lifts to a stop wheels automatically retract under load
FORKLIFT POCKETS
Provides a fast and convenient way to relocate columns
INNOVATIVE HORSESHOE WIRING
While other mobile column lifts are connected by four cables, the FCH columns use just three (forming a horseshoe), so the front or back of the lift is always open. Vehicles can be driven in and out of the bay without having to disconnect and reconnect cables.

Communication-Cable

PATENTED CONTROL SYSTEM
Operate lift from ANY post with this exclusive control system

  • Position memory to configure repeatable lifting cycles
  • Visual confirmation of each column’s status
  • Level lifting within 3” at each column
  • Audible descent alarm
  • Programmable height limiter
  • Battery indicator
  • Oversized “E-Stop” emergency stop button
E-STOP-Button
  • M140015 – Drive-on runway assembly / 4 column configuration / 60,000 lbs. capacity / Max. Wheel Base 33′ / Includes airline kit
  • ML41 – Saddle Cross Beam With Two (2) Support Blocks for frame pick-up 32,000 lbs capacity at 72” adapter spread / 24,000 lbs. capacity at 49” adapter spread
  • M140070 – Low Profile Cross Beam with Two (2) Support Blocks for frame pick-up 30,000 lbs capacity at 49” adapter spread / 21,000 lbs. capacity at 25” adapter spread
  • RS18 Jack – Stand, Screw-Type Adjustable 56.1”- 82.3” (1425mm-2090mm) 18,000 lbs. capacity
  • RS1852 Jack – Stand, Screw-Type Adjustable 34.3”- 55.5” (870mm – 1410mm) 18,000 lbs. capacity
  • RS36 Jack  – Stand, Screw-Type Adjustable 55.31”- 82.28” (1405mm – 2090mm) 36,000 lbs. capacity
    M120304 – Large wheel kit / Larger tires are raised on ramps for proper fork placement (per column)
  • M140157 – Weight gauge for Monarch power unit (per column)
  • M140071 – Extended fork kits (set of 4) supports inboard tires on dual-wheeled axles
  • M140078 – Fore and aft, frame engaging lift kit for use with two columns Maximum capacity @ 7,500 lbs per column.
  • M140015 – Drive-on runway assembly / 4 column configuration / 60,000 lbs. capacity / Max. Wheel Base 33′ / Includes airline kit
  • ML41 – Saddle Cross Beam With Two (2) Support Blocks for frame pick-up 32,000 lbs capacity at 72” adapter spread / 24,000 lbs. capacity at 49” adapter spread
  • M140070 – Low Profile Cross Beam with Two (2) Support Blocks for frame pick-up 30,000 lbs capacity at 49” adapter spread / 21,000 lbs. capacity at 25” adapter spread
  • RS18 Jack – Stand, Screw-Type Adjustable 56.1”- 82.3” (1425mm-2090mm) 18,000 lbs. capacity
  • RS1852 Jack – Stand, Screw-Type Adjustable 34.3”- 55.5” (870mm – 1410mm) 18,000 lbs. capacity
  • RS36 Jack  – Stand, Screw-Type Adjustable 55.31”- 82.28” (1405mm – 2090mm) 36,000 lbs. capacity
    M120304 – Large wheel kit / Larger tires are raised on ramps for proper fork placement (per column)
  • M140157 – Weight gauge for Monarch power unit (per column)
  • M140071 – Extended fork kits (set of 4) supports inboard tires on dual-wheeled axles
  • M140078 – Fore and aft, frame engaging lift kit for use with two columns Maximum capacity @ 7,500 lbs per column.